The UniPoint System
The MaxiPoint System
Resources



The UniPoint System

The UniPoint System makes any ducted system more efficient by allowing air flow to rooms being used and stopping wasteful flow to unused spaces. One wall mounted controller is used to turn selected dampers on and off so that the available air flow is confined only to the rooms where it is needed.

Imagine you are sitting in the lounge after dinner and the kids have gone to bed. It’s been a hot day and everyone will need maximum cooling to get a good night’s rest. You use your Zonemaster UniPoint control to shut off all zones except the bedrooms. Restricting the airflow to the areas you need increases the available cool air and doesn’t waste power on cooling unoccupied rooms.

Maximum cooling for a comfortable night.

The UniPoint System is an on/off controller for up to 8 zones with the following features:

• Manual and programmable on/off time control
• LCD indicator for zone status and parameter display
• Real time clock with battery backup
• Room temp display using on board sensor
• 5-1-1 zone on/off program (5 Weekdays + Sat/Sun)
• Personalised zone labelling
• Easy Installation (24 volt plug in)
• Safety Protection
  o Auto spill/ bypass – the designated spill zone is forced open if all zones are switched off
  (to prevent Duct splitting)
  o Temperature override – opens all dampers if air supply temperature is lower than low limit or exceeds high limit
  o After power loss all zones automatically return to previous on/off state when restored

The UniPoint System has the following benefits;

• Managing airflow so that the (cool or warm) air is only directed where you need it creates energy savings and greater comfort
• The programmable timer means that the zones can be set to open and shut at specific times for
  maximum efficiency

The MaxiPoint System

An upgrade of the UniPoint with up to 4 controllers (placed in different rooms) for greater convenience. Each controller interfaces with the others through a main control board (in the roof) so that the whole system can be accessed from any controller. This means that the operator doesn’t have to walk from the bedroom to the kitchen to turn off the bedroom, they can use the extra control fitted in the bedroom. This is especially useful in large or two storey homes.

Resources

To download PDF files, right-click the link below and select 'Save Target As'

Zonemaster UniPoint Control System - Setup Guide (PDF 636 KB)
Zonemaster MaxiPoint Control System - Setup Guide (PDF 616 KB)
Zonemaster Uni/MaxiPoint Control Systems - User Manual (PDF 428 KB)
Zonemaster UniPoint - System Configuration (PDF 84KB)
Zonemaster MaxiPoint - System Configuration (PDF 88KB)

© Copyright 2008 Polyaire™ Pty Ltd. All rights reserved